MeeFog Boosts Power Output by 15% at Sahara Power Station | APR Energy Case Study
Case Study: How MeeFog improved gas turbine cooling efficiency in extreme heat for General Electric Company of......
Vietnam’s Largest Power Plant Gains 60 MWs with MeeFog Cooling System
Gas Turbine Inlet Air Cooling
The MeeFog system provides fog evaporative cooling for three MHPS 701F gas turbines. Each skid produces a 20 MW power boost, resulting in a 60 MW total power boost for all units.
Project Conditions:
Location: PhuMy, Vietnam
Hot Day Conditions: 38 °C (100 °F)
Cooling Capacity: 11 °C (20 °F)
Elevation: 410 feet
Mee’s scope of work: Design, build, supervise installation
Max power boost per GT: 60 MW
Fog System Design:
Cooling Stages: 3
Operating Pressure: 2,000 psi
Fog Droplet Size: 19 micron (DV 90)
MeeFog Nozzle Count: 225
Nozzle Flow Rate: 0.045 gpm per nozzle
Max. Water Flow: 10.2 gpm
Max. Power Requirement: 15 HP
Learn More
Want to learn more about successful Meefog systems installation projects and case studies?
Other Related Blog Articles
Gas Turbine Inlet Air Cooling
Gas Turbine Inlet Air Cooling
Instant 1 MW Power Boost for Offshore Gas Re-Injection Well
Project Profile: A strategic upgrade on a Rolls Royce RB211 marine gas turbine resulted in a substantial......
Gas Turbine Inlet Air Cooling
20 MW of Power Recovery at Load-Following Power Plant
Case Study: Faced with the challenge of maintaining optimal power output as equipment aged and temperatures rose,......